See all parts that fit your 1978 280Z
2-Channel OEM Integration Digital Signal Processor with Automatic Time Integration
• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 2-output channels
• User adjustable 10-band graphic equalizer
• 30-second single button calibration
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
900W Peak (300W RMS) 6x9” CS Series 3 Way Coaxial 4-ohm Speakers with Integrated Midrange Speakers
$111.96
List price $159.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
280W Peak (90W RMS) 6x9” SXE Series 2-way 4-ohm Coaxial Speakers
$56.99
List price $71.99
600W Peak (300W RMS) 6.5" Mille PRO Series 3-way 4-ohm Component Speaker System
$999.99
List price $1175.00
250W Peak (200W RMS) 6.5″ PNW Series 2 Way Component 3-ohm Speakers
$319.00
List price $339.00
600W Peak (70W RMS) 6.5" XED Series 2-Way Coaxial 4-ohm Speakers
$49.99
List price $59.99
• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 2-output channels
• User adjustable 10-band graphic equalizer
• 30-second single button calibration
The state-of-the-art FiX digital signal processor (DSP) is engineered to deliver world-class sound from factory audio systems, without replacing the OEM source unit. FiX 82 and FiX 86 automatically correct time-delayed factory outputs prior to signal summing and EQ correction. With a powerful 24-bit DSP processor and quad 1/3 octave equalizers on board, complex factory signals are combined and level matched automatically into flat, full-range stereo signals. Unlike typical OEM interface products, the FiX DSP automatically corrects time-delayed factory outputs prior to signal summing and EQ correction. Calibration takes just a single button press and about 30 seconds to complete, with no special equipment needed.
Using the TüN software via USB, you can access a complete suite of diagnostic panels that show the frequency response of input signals as well as the corrected outputs. Adjustments can be made to input polarity, muting and filtering, and new calibrations can be initiated from the PC as well. The 8 channel inputs accept virtually any OEM analog audio signal — from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30-volt RMS). The FiX processor is designed to perform as a turn-on and turn-off controller for the aftermarket components in your system. There are three selectable options to control the method of turn-on: +12-volt remote, signal sensing or DC offset.
Best selling similar products
• 15 Band Parametric EQ
• 8-Channel RCA Outputs
• Provides up to 2 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments
(3)
$109.99
List price $131.99
• Plug and Play T-harness for faster installation
• For select 2019-2024 vehicles from Chevrolet, GMC, Cadillac
• Designed for Ethernet amplifiers
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
(3)
$517.99
List price $613.99
• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay
(8)
$829.00
List price $1109.00
• Plug and Play T-harness for faster installation
• For select 2010-2021 vehicles from Chevrolet, GMC, Cadillac
• Designed for MOST amplified systems
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
$638.99
List price $709.99
• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 6-output channels
• Access four user-adjustable 10-band graphic equalizers
• 30-second single button calibration
(14)
$529.99
List price $529.99
• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP
$419.99
List price $419.99
• 8-Channel digital signal processo
• 80 total bands of equalization
• TüN software offers quick input/output setup
• 8 RCA inputs or 1 optical input
• Includes DRC-200 digital remote control
(10)
$579.99
List price $579.99
• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software
$419.99
List price $455.00
• Plug and Play T-harness for faster installation
• For select 2021-2022 vehicles from Ram, Dodge, Chrysler
• Designed for both amplified and non-amplified systems
• Selectable 15-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
$255.99
List price $419.99
Manufacturer:
Model Number:
FiX-82
Weight:
2.58lbs
Internal SKU:
fix82
Internal Product ID:
95649
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
V-Series: 5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable
(25)
$29.99
List price $49.99
V-Series: 5m (16.40 ft) 2-Channel RCA Audio Interconnect Cable
(43)
$12.99
List price $18.99
X-Series: 5m (16.40 ft) 2-Channel RCA Audio Interconnect Cable
(24)
$19.99
List price $29.99
• 4-channel Load Sensing Adaptor
• Fixes a common problem with connecting the FiX-82 to a factory amplifier
• Provides a lower impedance so the factory amplifier's load sensing circuit will allow the FiX-82 to work with it
(1)
$44.99
List price $44.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
